Infineon Technologies TLE493D-P3XX-MS2GO 3D 2Go Evaluation Kit

TLE493D-P3XX-MS2GO 3D 2Go Evaluation Kit by Infineon Technologies is designed for 3D magnetic field sensing using third-generation Hall sensors. It includes the TLE493D P3B6 (I²C interface) and TLE493D P3I8 (SPI interface) sensors, offering precise magnetic field detection for various applications. 

The kit consists of a 3D evaluation board and a standalone 7mm x 7mm x 5mm ferrite block magnet, enabling rapid testing and development. It supports automotive, industrial, consumer, and high-performance applications, providing accurate angle, position, and motion sensing. The compact form factor and digital communication interfaces make it suitable for contactless position detection and rotational movement measurement.

Features of TLE493D-P3XX-MS2GO 3D 2Go Evaluation Kit

The Infineon TLE493D-P3XX-MS2GO 3D 2Go Evaluation Kit simplifies 3D magnetic field sensing with 3rd generation Hall sensors.  It offers a complete platform for evaluating and developing applications using I²C and SPI interfaces. Let’s explore some of the salient features:

Sensor Integration and Communication

The Infineon TLE493D-P3XX-MS2GO 3D 2Go Evaluation Kit is designed for 3D magnetic field sensing, utilizing the TLE493D P3B6 and TLE493D P3I8 3D magnetic Hall sensors. These sensors represent Infineon's 3rd generation of magnetic field sensing devices.  The kit supports both I²C (TLE493D P3B6) and SPI (TLE493D P3I8) communication interfaces, offering flexibility in system integration.

Hardware Components

The kit includes a dedicated 3D evaluation board along with a 7mm x 7mm x 5mm ferrite block magnet, which provides a defined magnetic field for sensor testing and calibration. The evaluation board incorporates an Infineon XMC1100 microcontroller with Arm Cortex-M0 CPU and an onboard J-Link Lite debugger, facilitating code development and debugging. Power is supplied via a micro USB connection, which also provides ESD and reverse current protection.

Software and Development Tools

The TLE493D-P3XX-MS2GO kit includes a Graphical User Interface (GUI) designed for plug-and-play development. This GUI simplifies initial setup and allows for quick evaluation of the sensor's capabilities.  The kit also enables customizable programming, allowing developers to tailor the sensor's behavior to specific application requirements.

Graphical Interface for Rapid Development

The GUI allows real-time data visualization, simplifying testing and calibration. With pre-configured evaluation tools, developers can modify parameters, analyze sensor outputs, and optimize system performance without extensive coding.

Getting Started with the Infineon TLE493D-P3XX-MS2GO 3D 2Go Evaluation Kit

Follow these steps to get started with the Infineon TLE493D-P3XX-MS2GO 3D 2Go Evaluation Kit:

1. Unboxing and Inspection:

Carefully unpack the kit and verify the presence of 3D evaluation board, the ferrite block magnet, and any included documentation. Visually inspect the board for any physical damage.

2. Connecting the Hardware:

Connect the evaluation board to your computer using a micro USB cable. This will provide power to the board.

3. Software Installation:

Download and install the necessary software, including the provided GUI. Refer to the Infineon website for the latest software releases and documentation.

4. Launch the GUI:

This interface allows you to interact with the sensors and visualize the magnetic field measurements. Explore the different features of GUI, including sensor configuration, data acquisition, and visualization tools.

5. Basic Measurement:

Place the ferrite block magnet near the sensors on the evaluation board, and observe the changes in the magnetic field readings displayed in the GUI. Experiment with different orientations and distances to understand the sensor's response.

6. Development and Customization (Optional):

For more advanced applications, you can develop your own code to interact with the sensors. The board includes an on-board J-Link Lite debugger and supports customizable programming. 

Applications

The TLE493D-P3XX-MS2GO evaluation kit targets a range of applications, including automotive systems, industrial control, consumer electronics, and other high-performance applications requiring 3D magnetic field measurement.  The kit offers the benefit of a complete, integrated solution for evaluating and developing with 3rd generation 3D magnetic sensors, simplifying the development process through its plug-and-play functionality and user-friendly GUI.