Gimbaled engines use LOX/RP-1 turbopump gas-generator design for reusable rockets.

Merlin Engine (Merlin-1D) - Falcon 9 & Falcon Heavy

<h3>Overview</h3><p>The Merlin rocket engines are specifically developed for recovery and reuse features of the Falcon series of launch vehicles. These engines are gimbaled and have throttle and restart capability for high degrees of control. Two of the nine Merlin engines in the first stage of the Falcon 9 can malfunction without affecting the launch. Merlin engines utilize cooled rocket-grade kerosene (RP-1) and chilled liquid oxygen as rocket propellants in a gas-generator power cycle. A Turbopump feed system feeds the propellant, heated helium pressurizes the fuel tank. and dual redundant triethylaluminum-triethylborane (TEA-TEB) pyrophoric igniters for restart reliability.</p><p>The current active models are Merlin 1D (M1D) for sea-level and Merlin 1D Vac (MVac) for vacuum. These engines have a thrust of 854 kilonewtons at sea level and 981 kilonewtons in a vacuum, respectively. It has the highest thrust-to-weight ratio of approximately 200:1. The Merlin 1D features increased reliability by increasing fatigue life and improving chamber and nozzle thermal margins. It is also easier to manufacture by decreasing the parts count and labor hours.&nbsp;&nbsp;<br></p><h3>Problem / Solution</h3><p>Space is an expensive business. NASA’s space shuttles and Russia’s Soyuz rockets cost an average of $1.6 billion and $53-$225 million for every launch, respectively. However, using reusable booster rockets significantly reduces the expenses for spaceflight.&nbsp;</p><p>Since conventional engine designs are not suited for reusable launch vehicles, the Merlin rocket engines are designed and developed specifically to be used in the Falcon series of launch vehicles. The Merlin engines feature retrograde thrust, gimbaled nozzles to adjust the thrust angle, advanced heat shield, high thrust-to-weight ratio, minimized failure nodes, etc. These factors enable the Merlin to be the most suitable engine for the Falcon launch vehicles.&nbsp;<br></p><h3>Design</h3><p>Engine control</p><p>Each Merlin engine is assigned one processing unit, which employs three computers constantly checking on the others to instantiate a fault-tolerant design called a triple-redundant system.</p><p><br>Gas generator</p><p>Merlin engines utilize cooled rocket-grade kerosene (RP-1) and chilled liquid oxygen (LOX) as rocket propellants in an open-cycle or gas-generator power cycle instead of a staged combustion cycle. A gas-generator cycle burns some of the fuels to generate exhaust gasses that power the pumps, then expelled to the atmosphere or vacuum.</p><p><br>Turbopump</p><p>The engine’s propellants are supplied by a single-shaft, dual-impeller turbopump with a pintle-type injector, which provides inherent combustion stability. The Merlin LOX/RP-1 turbopump spins at 36,000 RPM, and produces 10,000 horsepower or 7,500 kW. The turbopump design supplies the hydraulic actuators with high-pressure fluid, which is recycled back into the low-pressure inlet. Thus, a separate hydraulic drive system is not needed.</p><p><br>Nozzle</p><p>The Sea Level Merlin engines used in the second stage have a smaller exhaust section and 16:1 expansion nozzle primarily for ascent from Earth.&nbsp; The Vacuum Merlin engine used in the second stage has a bigger exhaust section and a larger expansion nozzle of 165:1 to maximize efficiency in the vacuum.&nbsp; The combustion chamber is cooled by regenerative cooling, while the expansion nozzle is by radiative cooling. The nozzle and thrust chamber are lined with a milled copper alloy to provide large heat flux margins.</p>

Falcon User Guide

Evolution of the SpaceX Merlin-1 engine

Rocket Engine Cycles

The Definitive Guide To Starship: Starship vs Falcon 9, what’s new and improved?

To cheaply go: How falling launch costs fueled a thriving economy in orbit

MERLIN – SEA LEVEL

Throat Area 

Nozzle Area 

Engine Type

Model

Propellant

Propellant Mix 

Propellant Feed System

Thrust (Sea Level)

Specific Impulse

Chamber Pressure

Throttle Capability

Restart Capability

Nozzles

MERLIN – VACUUM

Throat Area

Nozzle Area

Propellant Mix

Thrust (vacuum)	

Specific Impulse (vacuum)	

Gimbaled engines use LOX/RP-1 turbopump gas-generator design for reusable rockets of Falcon series. 

MERLIN – SEA LEVEL
Throat Area	0.042 m2
Nozzle Area	0.90 m2
Engine Type	Liquid, gas generator
Model	Merlin-1D++
Propellant	LOX / RP-1