Prototyping Board for RA0E3 Cortex-M23 Microcontrollers

Renesas Electronics FPB-RA0E3 Prototyping Board

<p id="isPasted">The Renesas Electronics FPB-RA0E3 Prototyping Board is designed for evaluation and development using RA0E3 microcontrollers. It integrates an RA0E3 MCU based on a 32-bit Arm Cortex-M23 core operating at 32 MHz, with 16 KB flash and 2 KB RAM. The board includes a built-in SEGGER J-Link emulator circuit, enabling programming and debugging without external hardware tools, and supports direct connection via a USB Type-C interface.</p><p>The board provides through-holes for all MCU signal pins, allowing straightforward integration with breadboards and external circuits. Expansion is supported through Arduino Uno and Pmod interfaces, enabling connection to additional modules and peripherals. Basic user interaction is enabled through one push button and two LEDs, while an oscillator pad is available for timing configuration. The compact board form factor supports rapid prototyping and evaluation in embedded system development workflows.</p><h2>Features of FPB-RA0E3 Prototyping Board </h2><p>The Renesas FPB-RA0E3 Prototyping Board enables evaluation and development with RA0E3 microcontrollers. It integrates debugging, prototyping access, and expansion interfaces to support embedded system design and testing workflows. Let’s go through its features in detail:</p><h3>Microcontroller Architecture and Core Resources</h3><p>The FPB-RA0E3 Prototyping Board is based on an RA0E3 microcontroller featuring a 32-bit Arm Cortex-M23 core operating at 32 MHz. It includes 16 KB of flash memory and 2 KB of RAM, supporting low-power embedded applications. The MCU is provided in a 20-pin TSSOP package, offering a compact footprint suitable for prototyping and small-scale embedded designs.</p><h3>Integrated Debugging and Programming</h3><p>The board incorporates a built-in SEGGER J-Link emulator circuit, enabling programming and debugging without external tools. This integrated emulator allows direct connection via a USB Type-C interface, simplifying firmware development and testing workflows. The onboard oscillator pad supports timing configuration and facilitates quick setup for application development.</p><h3>Prototyping and Signal Access </h3><p>Through-holes are provided for all MCU signal pins, allowing direct access for external connections. This configuration supports rapid prototyping using breadboards and discrete components. It enables users to interface the microcontroller with sensors, actuators, and peripheral circuits without requiring additional hardware adapters. </p><h3><strong>Expansion Interfaces and Peripheral Connectivity</strong></h3><p>The board supports Arduino Uno and Pmod interfaces, enabling compatibility with a wide range of expansion modules. These interfaces allow integration with communication, sensing, and control peripherals, supporting flexible system design and testing across different application scenarios.</p><h3><strong>User Interface and Board Integration</strong></h3><p>Basic user interaction is provided through one push button and two LEDs, enabling simple input and output control during development. The compact board size supports integration into prototype setups, while compatibility with RA0E3 software tools facilitates configuration, programming, and evaluation within embedded development environments.</p><h2>Applications</h2><p>The Renesas Electronics FPB-RA0E3 Prototyping Board is used in general-purpose embedded systems for evaluating and developing low-power microcontroller-based applications. In IoT devices, it supports sensor interfacing, data acquisition, and basic control functions. For industrial automation and sensors, the board enables prototyping of monitoring and control systems. In consumer applications and home appliances, it can be used for implementing control logic and user interface functions. It is also applicable in building automation for environmental monitoring and device control. The board supports the development of medical and healthcare devices, as well as wearable systems requiring compact, low-power embedded processing. </p>

Renesas Electronics FPB-RA0E3 Prototyping Board - Product Brief

Microcontroller

CPU Core

Clock Frequency

Flash Memory

SRAM

Package Type

Debugging Interface

Power/Connection

Applications

The Renesas Electronics FPB-RA0E3 Prototyping Board is designed for evaluation and development using RA0E3 microcontrollers. It integrates an RA0E3 MCU based on a 32-bit Arm Cortex-M23 core operating at 32 MHz, with 16 KB flash and 2 KB RAM.

Microcontroller	RA0E3
CPU Core	Arm Cortex-M23, 32-bit
Clock Frequency	32 MHz
Flash Memory	16 KB
SRAM	2 KB
Package Type	20-pin TSSOP